|
|
Post by Marathonman on Dec 1, 2019 11:16:00 GMT -6
It is quite amazing at the amount of mind control the cabal has on people these days. i posted Creasysee's video of his electronic part G on the Arduino site. what happened is they said the part G was not working just some control lights blinking.
i immediately started laughing at them and the people on OU that are so called University educated. i had to tell them the lights are not control lights as they are the lights on the outputs which are being controlled by inductive reactance. the amount of cabal mind control is unbelievable as none of them has the ability to think outside the box, thinking what they have been taught is the only way and that free energy is impossible. this was the doing of J.P.Morgan in his rampage to rid the world of Tesla and the free energy equations from the face of the earth changing every single test book in the U.S. (FACT)
here lies the problem, most people do not understand the working parameters of a generator and that a standard generator would be Over unity or self sustaining if not for the cogging effect or reverse torque if you will, placed upon the rotor. the amount of power used to combat this reverse torque is unbelievably large which renders the generator massively inefficient. if the reverse torque was removed then a massive motor would not be required to turn it.
another thing is what people do not understand is the feed back into the system is stupidly small compared to the output. a standard generator uses only around 10% of the output to be feed back to the AVR which regulates the potential to the exciters or primaries if you will. once they are at working "PRESSURES", as in magnetic field intensity and line current between the AVR and the primaries, the magnetic fields can easily be maintained.
current (pressure) in this line creates a certain amount of magnetic field intensity between the north and south electromagnet. if the draw is increased the resistance on the output circuit drops allowing more current to flow which then sends more current to the AVR increasing the feed pressure of the primaries which in turn increase the intensity of the magnetic fields. once the system equalizes the amount of potential needed to excite the primaries reduces to just the IR2 losses with the rest just passing by as if it were a straight piece of wire. the pressure to maintain the magnetic fields is still in the exciting line between the AVR and the primaries as this is still needed to maintain the magnetic fields just not being directly used.
what people fail to realize is we are dealing with pressure regulated systems. just because they are electrically driven does not mean we are not dealing with pressure. electricity is Eather pressure and must be at the proper pressures to maintain the output of man's generating systems. the only time the draw on the primaries are increased is when the load on the external system is increased. after equalization the primary draw is then reduced to just the IR2 losses again with the rest of the pressure passing right on by yet needed to maintain the magnetic field intensity.
in the Figuera device the very same scenario is taking place except the AVR has been replaced with Part G which regulated the current going to the exciters/primaries. part G also stores and releases potential which is used to maintain or preserve the exciting potential (Pressure) in the form of a magnetic field. this is what allows the device to self run
understanding the mechanism of generation and the realization of the three electromagnet core pattern of generation will aide in the advancement of your reproduction of this device as both use the same mechanism of generation. you have to realize Figuera already figured out how to build a self running device with not one but two working devices presented to the patent office. just because your dogma teachings say it isn't so doesn't change these facts that Figuera found the key to self sustainment. it is not Figuera's fault replicators failed in their attempts to replicate, it just means you have something wrong with your build. this is why Internet sites like this one are here so interested and like minded people can come together to replicate this device without all the dogma taught ney sayers screaming it can't be done.
|
|
|
|
Post by Marathonman on Dec 2, 2019 10:53:52 GMT -6
since i started this site i have had a few donations with the latest one staying put until i can get back on my feet. there has been a few people pm me stating to make substantial donation so i can finish my build. what it turned out to be was just blowing smoke up my back side which really upsets me. it is not the fact that i do not have the donation because i can really care less if anyone donates as i spend just about all my money on this anyways. what bothers me is why would someone lie like that which i have been trying to understand, why say it when you have no intention of doing so in the first place. so i have to say do not contact me if all you are going to do is blow smoke up my backside as my plate is completely full and i do not need extra BS in my life. if you still feel like blowing smoke up someone's backside please go join OU or EF as they love doing those kind of things there.
Regards,
Marathonman
|
|
|
|
Post by creasysee on Dec 3, 2019 8:20:24 GMT -6
Hi All! Ooops. Looks like I need to rebuild the commutator. I'll come back with this later. I need to spend more time explaining what I think here. Hey Marathonman, I have a question about part G with two brushes. I remember, you had a long thread on another forum about this, but I don't understand this moment also. I'm building part G now and doing two brushes here and I need to know it urgent. The question is: Will the brushes close when they are in the position shown in the picture? I think the surface of the commutator can burn out here and there will be strong sparking at this point because the current will reach tens of amps at this point. Can you explain this moment, please?  Thanks, creasysee |
|
|
|
Post by cornboy on Dec 3, 2019 14:44:45 GMT -6
Hi Creasysee, sorry to hear about your commutator, what happened?.
My understanding of the negative brush is that it only feeds back the neg half of the signwave from the SECONDARIES, helping to supply G's losses, and of course the pos brush feeds back the positive half of the sign from the secondaries to over power the starting supply, which can then be disconnected.
Best if you build your rotating brush assy with + and - brushes for balance and smooth running, you don't have to connect both up until you are sure you won't damage anything.
The moment the two brushes are on the same turns is tiny at 3000 rpm, so don't be too hesitant to try, that's how you learn.
Hope this help's,
Regards Cornboy.  |
|
|
|
Post by Marathonman on Dec 3, 2019 15:11:46 GMT -6
Exactly and well put Cornboy.
I have posted a graph relating to this very subject that has four graphs each 90 degrees advancement and explains reasons for it. as Corboy said, the brushes will only be connected for 170 or so microseconds so i really do not see any damage or heating being done. also according to the graph the secondary feed back will be at zero volts in that position and opposite side as it starts the climb in the opposite AC direction.
i would make the provisions for the secondary feed back brush but when testing the unit out from the start leave the secondary brush off to concentrate on the balancing of the primaries and part G. after that is achieved with a good output you can then move forward attaching the secondary brush. since the actual brush does not weigh that much the balance of the rotor should remain intact.
Information is on Tech Info thread on page 3 -12 th post.
this is the same thing a certain person on OU could never understand as always screaming there is a short. no there is not because the secondary feed back is at ZERO VOLTS and the reducing electromagnet and part G's reduction is headed straight for the positive brush.
very good question Creasysee, it is always my approach to people that if you do not understand just ask and it will be explained. this is why i encourage the readers to join the forum as to ask pertinent questions like you just did. well done.
Regards,
Marathonman
|
|
|
|
Post by Marathonman on Dec 9, 2019 7:25:58 GMT -6
Part G is not a commutator Skyrob just so you know, it is an active inductor and your misconception of the patent drawing taking it literally at face value will be your undoing wasting your time and money.
Good luck you will need it.
Marathonman
|
|
|
|
Post by creasysee on Dec 9, 2019 10:37:18 GMT -6
Thanks a lot Cornboy. Thanks a lot Marathonman.
Sometimes the understanding of the work comes to me in parts. Despite the fact that I have been doing this device for 2 years I somehow did not pay enough attention to the feedback. I've always found it much easier to use a transformer and rectifier for this... Anyway, I'll try both options.
Regards, creasysee
|
|
|
|
Post by Marathonman on Dec 9, 2019 23:56:07 GMT -6
You can always add the secondary brush later after testing. i would make provisions for it and just not install it until you are in the self running phase.
things like that happen to all of us. this device just has so many things going on it's not funny which can be easily overlooked. why do you think i am really not in a hurry
MM
|
|
|
|
Post by Marathonman on Dec 14, 2019 9:49:11 GMT -6
I would like to announce we have a new member that decided to join the ranks. Welcome Ricardo as our new member in the Figuera quest.
i hope his visions of the future of self sustainability are in line with ours as each member is here for that very reason and more. it is quite obvious that it is up to people like us that decide to put the first foot forward in self sustainability as we all know relaying on our Greedy Governments or Corporation will leave you empty handed and starving so it is imperative for someone to take the first step and that would be the ones on this site. we have chosen to take that first step as did Ricardo and together we will make a difference in this world.
WELCOME aboard RICARDO and if you have any such question please feel free to ask away.
Regards,
Marathonman
|
|
|
|
Post by Marathonman on Dec 15, 2019 19:36:46 GMT -6
Really interesting video from Steven Greer. the video start is about a 6 inch creature shaped like a human which can be skipped to 4:30 aprox. what he discusses is the very foundation of resistance to free energy of the powerful Elite Cabal control. very interesting indeed of why we are on the brink of destruction..
Another good one from Mr Greer. i personally think that if a person actively denies the existence of free energy needs their head examined.
Regards,
Marathonman
|
|
|
|
Post by Marathonman on Dec 16, 2019 12:29:40 GMT -6
The Cabal of the controlling Elites are so brazen and gutsy, they brag right in our faces just how they are in control and they screw us any way shape or form they can. these are the very people that put Tesla out of business burning his lab to the ground destroying his life to the point of feeding pigeons in central park for the remainder of his life. if they have done this to one of the greatest mind in the world as did many, many others even outside of Physics and Science going so far as murdering them to silence, do you not think suppression is real and active.
J.P. Morgan spent millions altering history paying greedy money hungry physicist to alter Maxwell's equations to hide the fact of free energy is possible. he pulled school books out of circulation and had them reprinted. these Cabal people are the same people that hand picket Einstein then stole other physicist work to make it look like Einstein was a genius. the entire side show act was for one reason and one reason only, to halt all advancements of Science and Physics as we know it.
think about what i have stated, what have we done in the last 100 years to advance the human condition.? NOTHING! but pain and misery was placed upon the humans of this world by the Cabal Elitist who can care less about Humans or there suffering. it is ALL ABOUT CONTROL and the fact that each person having their own energy producing devices would interfere with their sick lust for control.
the education system was overthrown by the Elitist as another form of mind control. since our Governments have been overtaken with these Cabal pawns it is quite easily seen why the system of control was put into place. children are easily influenced so the system of control was put into place and the higher the person rises in this false education system the higher the pay and loyalty to that system.
so if we have these control systems in place do you NOT see the need for them to suppress free energy and the lies to cover up their control. the Cabal will stop at nothing to suppress free energy and will lie, cheat, threaten, destroy and even murder to protect their control scheme. that is why it is SO IMPORTANT to open source all free energy device as this is the only way to get the genie out of the bottle. it is up to people like us to make sure these devices are available to the general public and to make sure all information is freely available. like so may researchers that were murdered or died taking their secrets with them open sourcing will insure the truth is forever preserved.
most if not all of mans Physics and Science laws are incorrect or were improperly understood and free energy devices prove this to be a fact. do NOT listen to haters or paid misinforments as they will do nothing but drag you down to their sick and perverted level.
we are systematically being poisoned by the Cabal by spraying very toxic chemicals and heavy metals in our atmosphere, food and water supplies which is killing everything in it's path including the very much needed bacteria in the soils. if you do no believe me just look at the damage being done to Hawaii, it is SICKENING. Chemtrails can contain any or all of the following: smart-dust, weaponized fungal spores, human blood, pathogens, metal oxides and other heavy metals including magnesium, manganese, strontium, barium, and aluminum. The levels of these particulates are often hundreds if not thousands of times beyond the acceptable limit for being considered toxic. Fine toxic particulates in the air have also been linked to lung cancer, cardiopulmonary mortality, and chronic illness in children as cited from reports written by The Journal of the American Medical Association (1998).
over the years the plants and trees build up massive amounts of these heavy metals in them and when a fire is started Magnesium and Aluminum burn so hot it is impossible to put out the fires as reported around the world by firefighters. toxic levels are being reported in children soil and ground water and another sickening fact is 40 % of the worlds Bee population was decimated last year alone. no Bees, no Pollination, no food, no life plain and simple. who would benefit from such a monstrosity..... you guessed it, MONSANTO. the maker of GMO seeds that are proven deadly.
so as you can see and read it is not just free energy on the chopping block it is our very lives that are at stake. together we can make a difference and the time to act is RIGHT NOW.
PS. The Cabal control is everywhere in every aspects of our lives. the industries such as Building, Electrical, Plumbing, Food, Banking, Water, legal, Government, Corporations, businesses, people ie Birth certificate, SS number, ID card ect...ect.. if you look hard enough and boil it down to the basics you will see just how much we are controlled. it is sickening.
Regards,
Marathonman
|
|
|
|
Post by Marathonman on Dec 17, 2019 11:10:02 GMT -6
Quote Tesla 1900;
"What ever electricity may be, it is a FACT it behaves as an incompressible fluid and the earth may be looked upon as an immense reservoir of electricity."
Quote Mendeleev 1902:
"stated that his periodic Law predicted two inert chemical elements lighter then that of Hydrogen."
and
"The lighter of these two elements would be an all-penetrating all-pervasive gas."
for which Tesla believed he has discovered this gas and it was responsible for the electrostatic/electric field.
when looking upon the periodic table, each group has two full rows before the pattern changes. the elements before Hydrogen and Helium are missing. so it basically doesn't matter what you call it as a charge carrier, Tesla's Neutral particle, Mendeleev's lighter then Hydrogen gas or what ever it is, it is still there. the neutral, mass charge carrier is there and is responsible for most of what electricity does. if you have static electricity from the rubbing of cloth or what have you, it is minus a mass charge carrier with little to no current flow. with the addition of a mass charge carrier you now have current flow like that of a motional electric field. electric generators set mass charge carriers in MOTION from the torque place upon it.
even though some of these quotes are from other people i have thought most of my life electricity is NOT marbles flowing through a pipe or rather electrons flowing through a wire. i can care less what some foolish bought and paid for so called, "Highly Educated" Physics Professors says about their Cabalish take on the Universe. if so called free electrons comes from copper wire then copper wire ceases to be copper plain and simple. since copper doesn't change form then just maybe it is not flowing in wires and as many have stated, that electricity flows on the outside and Copper/Aluminum wires are Dielectric reflectors there fore it flows on the outside of the wire and the magnetic fields are the breaks or if you will, the controller of mass charge flows.
we are literally living in a sea of energy that surrounds everything in the Universe, the Sunlight is full of it, our air, our earth, we are completely swimming in a Universal sea of energy yet FOOLS ON THIS EARTH say we can not tap into it unless we BURN or explode a source of fuel. these people are acting like a bird sitting on a high tension electrical wire yelling "where is the electricity." as long as man continues to build closed loop systems referenced to ground it will prevent us from achieving our goal of free energy.
it is funny how the ELECTRICITY GIANTS of the past that built our present day society all stated there was a median we are pulling off of yet every fool since then says that there is not. what is even more funny is the very people stating it does not exist are the very same Cabal's trying to control us. it all started with the begger in purple, the hand picked puppet from the puppeteers, the biggest plagiarist known to man Einstein himself.
it seemed to Tesla that there is two distinct types of electricity and while i most certainly do not claim to know everything, electricity to me is NOT electrons flowing in a wire.
our entire solar system is teething with magnetic and electric fields set into motion by our lovely Sun the energy converter. i say energy converter as i tend to agree with Eric Dollard explanation, our Sun is NOT a fusion or Fission device, it is an energy converter that creates the condition for massive production of Hydrogen in a plasma type state producing massive amounts of magnetic and electric fields in the process. if the Sun was a fusion or fission device then how on earth do you explain the extremely cooler 6,000 degree temperature core with the surface and atmosphere at 2 million degrees. i am sorry folks but that is literally impossible to take place and since the heat is traveling inward the conversion process is an outside source traveling in as the laws of thermal dynamics says heat will travel away from the source ALWAYS.
so what does that tell you? the Sun is getting it's energy from an outside source, which is then converted from one form to another which effects EVERYTHING on earth including the weather so you Global warming nuts need to get a grip and live with it. this then explains why the Sun is NOT shrinking in size as if it were a fusion device it would burn out as it exhausts all it's fuel.
so you are probably wondering by now what the hell is my point of all this rambling, "YES, i do have a point". and the point is the Globalist Cabal do NOT want the average citizens of this earth to know the real truth of our Universe. they purposely hide the truth, hampering the school systems, scamming you into believing you are getting an education when in reality you are supporting the Cabal Cause of domination and control.
it is quite obvious you are here because you believe some thing is not right or something is out of whack, otherwise what would you be here for other then some are here to spy or to keep track of the progress or replication. all my years of research tell me something is really screwed up here and we have been lied to for a very, very long time because the information they produce just do not add up to my facts and observations.
so if the observational facts does not add up, who then is lying to whom. i say follow the money trail and just see who is the beneficiary from the lies.
Regards,
Marathonman
|
|
|
|
Post by creasysee on Dec 20, 2019 9:26:46 GMT -6
Hi Marathonman! I'm going to buy wire for secondaries and cannot decide what diameter I should order. I planned to use 1.4mm/AVG15 but now I think that need to recalculate all. Can you help me again, please, by reviewing it?
My calculations are: Max current of N set is 10A Min current of S set is 5A The total current is 15A Voltage 100V So, the total power is 1500W The core of part G (+500W) 2000W (variac max load was 9A 220V) I going to use 5 (five) triplets for start. Each N primary will connect with others in parallel. Each S primary will connect with others in parallel. Each triplet should be calculated for 1500/5 = 300W. You told that: 1) 10lb/4.5kg (by weight) - 1100W. I have 14.4lbs/6.5kg of part G and 1.66lbs/0.75kg of a primary, so I can get 1440W only (by weight) and I need 9 primaries (by weight, I'll use 5 primaries for the first start) 2) 7.4lbs/3.3kg (by pressure) per square inch - 1000W. I need to calculate primaries there for current in set 10A@100V The calculation of primaries for total power 1500W. Each primary 200W (100V@2A, 2A = Max current of N set is 10A / 5 primaries in the set) The source data: Current in Amps = 2A
Turns = 140 (one group from 4, for example)
Area of core = 4.25cm2/0.66"2
Gap = 0.22cm/0.08" (see below)
Estimated force is 7.4lbs/6.6kg@1"2 for 1000W = 1.48lbs/0.66kg@1"2 for 200W = 0.97lbs/0.43kg@0.66"2 for 200W (I'm not sure that I'm correct here)
The result is: Yes, I got 0.97lbs/0.43kg/4.32H but on distance 0.22cm/0.08" only. I don't know what is the gap, when you told about pressure there: remember, your electromagnets are accountable for half the needed flux of the secondary, so if you were to need 14.8 lbs, which is the needed pressure per kilowatt, each electromagnet must hit 7.4 lbs per square inch non saturated. P.S. Maybe I need to connect primaries in series? Each primary will have 10 Amps (EDIT: No, this is no make sense, because the same power 200W: 100V@2A vs 20V@10A. The lower current is easy to implement.) P.P.S. Let me know where you found or how you get this (14.8 lbs @ kilowatt @ square inch), please, I'll research this.
Thanks, creasysee |
|
|
|
Post by Marathonman on Dec 20, 2019 11:13:32 GMT -6
I think you will be needing to much power to excite your primaries then what your secondaries will put out. the whole idea is to excite the primaries with as little power as possible to achieve the desired magnetic field compression. the example i gave is just per kilowatt output not your individual build. that figure was for a one kilowatt secondary output then your primaries are calculated and built from that. your secondaries are of course much smaller then that as is your primaries so you need to start from there.
1. decide what your goal output is or what you are trying to power whether it be an air conditioner or your whole house.
2. decide on how many secondaries you want or need or the amount of pressure you feel comfortable in dealing with. each secondary should be able to handle the divided total without saturation. ie... if you want say 3000 watts and decide on 8 secondaries then each secondary must be able to support 375 watts output. this is 5.55 lbs pressure per square inch shifted back and forth.
3. calculate and design your primaries to be accountable for half the needed output of the secondaries. both combined will equal the needed pressure for 375 watts secondary output. this is equal to 2.775 lbs per square inch pressure or 187.5 watts per primary.
4. calculate and design your Part G on each set of primaries individually either set N or set S as they are exact copies of each other. part G should be able to handle the power needed to excite each set individually. what this means is since part G is halved from magnetic fields into two sections, one increasing, one decreasing, each half should be able to support the draw needed to excite one set of primaries. this is the total excitation needed to drive one set of primaries at full potential.
if you need 10 amps to excite your primaries it will literally be impossible for your secondary to reasonably replace the losses and have a usable output. then on top of that part G will have to be very large in va rating to supply that large amount of potential. you must be able to excite the primaries with as little of potential as possible otherwise you are screwed. there is no sense in building a system that takes more power to excite it then it puts out which then points right back to a transformer which this device is not.
the problem with these type of calculation tools is they do not account for an opposing field compressing the field lines which makes it difficult to calculate properly. the primaries need to have the proper field line pressure at the length of the secondary when being opposed. hypothetically if your secondaries are two inches and your primaries are four inches the primaries must be able to maintain the proper pressure at two inches when the increasing primary is at peak.
i hope this makes sense to you.
Regards,
Marathonman
|
|
|
|
Post by Marathonman on Dec 22, 2019 10:22:42 GMT -6
I was going over some papers i have on D.B. Larsen and Harold Aspden. these two people alone made Einstein look like a 6 year old girl in a candy store. i find it rather exhilarating that these very highly educated people (much, much more then Einstein) simply destroyed the theory of relativity and swept it off the front porch into the gutter. just these two alone validate what i have been saying for years that Einstein was a puppet used to halt all advancements in Science and Physics as we know it. they derailed both advancements on purpose over 100 years ago and the only truth is kept behind closed doors in black OP programs fore which many are used against us, the very people that paid for it in the first place through taxes.
it find it hilarious and disgusting at the same time that people actually run around spouting nonsense that free energy is not viable. we live in a sea of energy so why in the world would it not be possible. i have to say that the evidence is slowly being erased by the Elitist as i have witnessed this myself and i am sure others have also. many, many sites that had very good information have been overtaken and all the info gone so i would suggest that people download all information even if you do not understand it fully. their may be someone that does and may benefit from it and others also that is why i download everything i can to my computer.
the powers that be do not want us to be independent individuals or working as a group. their lust for total control and greed for money is literally wiping out the Human race and it is up to people like us to find these devices, figure them out and publish to the world as this is the only way to turn the tides on humanity. i just ask please do not be greedy like those fools on Amazon that want to sell a Harold Aspden book for over 600 dollars for something that should be available to the public for free to advance humanity. SICKENING !
Regards,
Marathonman
|
|
